自動鏟料攪拌車的熱維護應該注意什么?
自裝載式攪拌車在長期運行過程中會自然發熱,但是超過設備本身可以承受的溫度,會對設備造成一定的損害。因此,如果設備溫度過高,則應執行相應的維護工作。讓我們來看看。
Self loading mixer will generate heat naturally during long-term operation, but it will cause certain damage to the equipment if it exceeds the temperature that the equipment can bear. Therefore, if the equipment temperature is too high, carry out corresponding maintenance work. Let's have a look.
防止發動機過熱:由于環境溫度高,發動機容易過熱。有必要加強對發動機冷卻系統的檢查和維護。請注意,這包括檢查水箱,恒溫器,水泵,風扇等,并會及時補充。注意冷卻水。當水溫超過100°C時,請停在陰涼處進行冷卻,讓發動機空轉并打開機蓋以散熱。
Prevent the engine from overheating: due to the high ambient temperature, the engine is easy to overheat. It is necessary to strengthen the inspection and maintenance of the engine cooling system. Please note that this includes checking the water tank, thermostat, water pump, fan, etc., and will be replenished in time. Pay attention to cooling water. When the water temperature exceeds 100 ° C, please stop in a cool place for cooling, let the engine idle and open the cover to dissipate heat.
防止發動機爆燃:夏季溫度很高,有時可能會超過35°C。本賽季部分耗盡的汽車發生自然爆燃的可能性更高。因此要做好預防工作。
Prevent engine deflagration: the temperature is very high in summer, and sometimes it may exceed 35 ° C. The possibility of natural deflagration of partially depleted cars this season is higher. Therefore, we should do a good job in prevention.
防止損壞汽車漆:暴露于強烈陽光下,汽車漆會老化并產生皺紋,而普通的美容蠟具有一定的防曬作用,但是汽車蠟中含有鉍因此,油漆會因長期的紫外線而生銹。留下一個黑點。車蠟本身并不能提高硬度或抗紫外線效果,但由于高溫會很快消失。停車時,請將車停在涼爽的地方。
Prevent damage to car paint: when exposed to strong sunlight, the car paint will age and wrinkle. Ordinary beauty wax has a certain sunscreen effect, but the car wax contains bismuth. Therefore, the paint will rust due to long-term ultraviolet rays. Leave a black spot. Car wax itself does not improve hardness or UV resistance, but it will disappear quickly due to high temperature. When parking, please park your car in a cool place.
防止汽車輪胎爆裂。如果溫度過高,則容易發生爆胎,如果溫度過高,則輪胎容易變形,拉伸強度降低。輪胎本身具有非標準的充氣壓力,由于老化,性能差以及行駛時輪胎在硬質金屬或其他硬物上的滾動,會導致車輛突然爆裂。
Prevent car tires from bursting. If the temperature is too high, the tire is easy to burst. If the temperature is too high, the tire is easy to deform and the tensile strength is reduced. The tire itself has non-standard inflation pressure. Due to aging, poor performance and the rolling of the tire on hard metal or other hard objects during driving, the vehicle will burst suddenly.
防止發動機潤滑不良:在高溫下,機油粘度降低,潤滑不良。因此,請檢查機油質量并及時添加或更換機油。注意及時清潔機油濾清器和散熱器,以確保機油暢通并散熱良好,并避免發動機過載。
Prevent poor engine lubrication: under high temperature, the oil viscosity decreases and the lubrication is poor. Therefore, please check the oil quality and add or change the oil in time. Pay attention to timely clean the oil filter and radiator to ensure smooth oil and good heat dissipation, and avoid engine overload.
防止制動故障:在高溫環境下,制動液容易蒸發和蒸發,在制動管中形成空氣阻力。另外,剎車蹄很容易磨損,剎車會損壞。因此,必須經常檢查和調整制動系統。在長山上,您需要注意駐車制動器,以確保良好的制動性能。如果制動輪轂很熱,請停止并使其冷卻。
Prevent braking failure: in high temperature environment, the brake fluid is easy to evaporate and evaporate, forming air resistance in the brake pipe. In addition, the brake shoes are easy to wear and the brake will be damaged. Therefore, the brake system must be checked and adjusted frequently. On Changshan, you need to pay attention to the parking brake to ensure good braking performance. If the brake hub is hot, stop and allow it to cool.
眾所周知,機械是在3點和7點鐘進行維護的。只有這樣,才能保證設備在正常運行下的良好性能,并能延長設備的使用壽命。希望每個人都可以遵循這一知識,合理使用該工具。
As we all know, the machinery is maintained at 3 and 7 o'clock. Only in this way can we ensure the good performance of the equipment under normal operation and prolong the service life of the equipment. I hope everyone can follow this knowledge and use the tool reasonably.