攪拌機運行過程中為什么會出現抱軸現象？
當你在使用攪拌機的過程中，如果遇到抱軸的現象，一定要及時找出具體原因，這樣才能快速，以免影響你的正常工作。但是從哪里開始呢?下面的內容是對中科攪拌機運行過程中出現的抱軸現象進行分析。
When you use the mixer, if you encounter the phenomenon of shaft holding, you must find out the specific reasons in time, so as to solve it quickly, so as not to affect your normal work. But where to start? The following content is to analyze the axle holding phenomenon in the operation process of the mixer in Sinology.
近年來,隨著我國經濟的快速發展,公路、鐵路和城市道路創建項目計劃擴大,越來越多的公司的建筑市場逐步擴大,中標項目不斷增加與支持設備已經添加項目,幾乎所有的項目都需要用混凝土,混凝土攪拌站,混凝土施工項目,機械施工的部分。綜合考慮各方面因素，大部分工程都采用了自建混凝土攪拌站的方法。由于現場施工時間長，條件很差，在生產過程中，拌和廠設備經常出現一些缺點，如處理不及時，會嚴重影響工程的施工進度和質量。
In recent years, with the rapid development of China's economy and the expansion of plans for road, railway and urban road construction projects, the construction market of more and more companies has gradually expanded. The number of bid winning projects and supporting equipment has been increased. Almost all projects need to use the first part of concrete, concrete mixing station, concrete construction project and mechanical construction. Considering all factors, most of the projects adopt the method of self built concrete mixing plant. Due to the long construction time and poor conditions, in the production process, the mixing plant equipment often has some shortcomings, such as the treatment is not timely, which will seriously affect the construction progress and quality of the project.
是什么原因使攪拌機保持軸?攪拌機的托軸是在攪拌過程中，將粉末、沙子和液體混合而成的一種粘合劑。它粘附在攪拌軸和攪拌臂上，在其表面形成一種非常厚的、難以追蹤的粘著劑。
What causes the mixer to keep its shaft? The supporting shaft of the mixer is an adhesive made by mixing powder, sand and liquid during the mixing process. It adheres to the mixing shaft and the mixing arm, forming a very thick and hard to trace adhesive on its surface.
隨著工程項目的不斷增多，與工程項目密切相關的攪拌機的應用也越來越廣泛，而攪拌機作為攪拌設備的心臟，對攪拌機的科學規劃和應用有著非常重要的作用?？茖W(xué)選擇攪拌機的工作參數，規劃結構，可實際推進工程功率，降低公司的成本。分析了攪拌機的工作機理，論述了攪拌機參數選擇的原則，并對攪拌機方案和應用的科學性作了評述。
With the increasing number of engineering projects, the mixer, which is closely related to the engineering projects, is widely used. As the heart of the mixing equipment, the mixer plays a very important role in the scientific planning and application of the mixer. Scientific selection of working parameters and structure of mixer can actually promote the project power and reduce the cost of the company. This paper analyzes the working mechanism of mixer, discusses the principle of selecting mixer parameters, and makes a key comment on the scheme and application of mixer.
混凝土強度的均勻性和顏色是混合的質疑的主要原因,缺乏一致性,能夠充分混合均勻,攪拌時間的聯系較大,現有相關規范的規則中使用的混合時基之前的規范控制的需要,與高性能混凝土技術的發展,特別是大劑量的礦物摻合料的使用,現有的規則不能滿足混凝土攪拌均勻性時間控制的需要。因此，本文討論了不同摻混時間對不同等級混凝土的含氣量、坍落度、粗骨料相對誤差和砂漿密度相對誤差的影響。畢竟，它決定了合理的混合時間和各目標的相對誤差控制范圍。
The uniformity and color of concrete strength are the main reasons for the query of mixing. The lack of consistency, the ability to fully mix evenly, and the greater connection between mixing time, the need for specification control before the mixing time base used in the existing rules of relevant specifications, and the development of high-performance concrete technology, especially the use of large doses of mineral admixtures, The existing rules can not meet the needs of time control of concrete mixing uniformity. Therefore, this paper discusses the influence of different mixing time on the air content, slump, relative error of coarse aggregate and relative error of mortar density of different grades of concrete. After all, it determines the reasonable mixing time and the relative error control range of each target.
一般攪拌機在運行過程中出現持軸現象都是由以上這些因素造成的，相信大家看了之后就知道如何了。
Generally, the phenomenon of shaft holding in the operation of mixer is caused by the above factors. I believe you will know how to solve it after reading it.
以上是中科攪拌機小編為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://pheenet.cnThe above is the relevant content introduced by Zhongke blender. To learn more, please visit the website: http://pheenet.cn
