自動上料攪拌車怎樣才是合適的胎壓？
自動上料攪拌車在碾過坑洞時，攪拌車輪胎同樣會受到擠壓。坑洞越大、車速越高，輪胎受到的擠壓力度也越大，這樣也會導致輪胎出現鼓包，下面來了解下自動上料攪拌車胎壓怎么才是比較合適的同時要注意什么？
When the automatic feeding mixer runs over the pit, the tire of the mixer will also be squeezed. The bigger the hole and the higher the speed, the greater the squeezing force on the tire, which will also lead to bulge of the tire. Now let's understand how the tire pressure of the automatic feeding mixer is more appropriate, and what should be paid attention to at the same time?
不少司機錯誤地認為，夏天氣溫高，降低胎壓能避免爆胎。這樣操作，攪拌車輪胎與地面的接觸面會加大，摩擦力增加，加快輪胎磨損，而且會導致攪拌車胎溫上升更快，更容易爆胎。所以，夏天依然要保持正常的胎壓。合適的胎壓能保證攪拌車輪胎的接地面積均勻，減少不必要的磨損。
Many drivers mistakenly believe that the high temperature in summer can prevent tire burst by reducing the tire pressure. In this way, the contact surface between the mixer tire and the ground will increase, the friction will increase, the tire wear will be accelerated, and the tire temperature will rise faster, and the tire will burst more easily. Therefore, the normal tire pressure should be maintained in summer. The proper tire pressure can ensure the uniform ground area of the mixer tire and reduce unnecessary wear.
因此，司機應該養(yǎng)成定期檢測胎壓的習慣，隨時了解輪胎的胎壓狀況。檢測胎壓可以到的維修店，也可以購買胎壓計自己檢測，胎壓標準可參照攪拌車的胎壓標簽。
Therefore, drivers should develop the habit of regular tire pressure detection, and know the tire pressure status at any time. You can go to a professional repair shop to test the tire pressure, or you can buy a tire pressure gauge to test it yourself. The tire pressure standard can refer to the tire pressure label of the mixer.
感謝您的閱讀，希望以上內容對大家有所幫助！
Thank you for your reading. I hope the above content can help you!
