混凝土攪拌車的施工工作以及保養工作
混凝土自上料攪拌車用來運送建筑用混凝土的專用卡車；由于它的外形，也常被稱為田螺車。下面混凝土自上料攪拌車廠家來講講攪拌車的施工工作以及保養工作！
The concrete self-loading mixer truck is a special truck for transporting construction concrete; Because of its shape, it is often called a snail cart. Next, the manufacturer of concrete self-feeding mixer truck will talk about the construction and maintenance of the mixer truck!
這類卡車上都裝置圓筒型的攪拌筒以運載混合后的混凝土。在運輸過程中會始終保持?jǐn)嚢柰厕D(zhuǎn)動，以保證所運載的混凝土不會凝固。運送完混凝土后，通常都會用水沖洗攪拌筒內部，防止硬化的混凝土占用空間，使攪拌筒的容積越來越少。
These trucks are equipped with cylindrical mixing drums to carry mixed concrete. During transportation, the mixing drum will always be kept rotating to ensure that the concrete carried will not solidify. After the concrete is transported, the inside of the mixing drum is usually washed with water to prevent the hardened concrete from occupying the space and reducing the volume of the mixing drum.
動力由二類底盤全功率取力器輸出通過傳動軸把動力傳給液壓泵，液壓泵產生液壓能通過油管傳到液壓馬達，液壓馬達把液壓能轉化為動能并通過減速機減速增扭傳遞到攪拌罐，通過調節（雙作用變量）液壓泵的伺服手柄角度從而實現攪拌罐正反轉及轉速的大小，以實現砼裝料、攪拌、攪動、出料等作業。
The power is output by the Class II chassis full-power power take-off and transmitted to the hydraulic pump through the transmission shaft. The hydraulic energy generated by the hydraulic pump is transmitted to the hydraulic motor through the oil pipe. The hydraulic motor converts the hydraulic energy into kinetic energy and transmits it to the mixing tank through the reducer to reduce the speed and increase the torque. By adjusting the angle of the servo handle of the hydraulic pump (dual function variable), the positive and reverse rotation and the rotational speed of the mixing tank can be realized, so as to achieve concrete loading, mixing, stirring Discharge and other operations.
攪拌車作為運輸用汽車，在維護和修理方面須遵照規定，執行“定期檢測、強制維護、視情修理”的維修制度。在這個大前提下，再結合混凝土自上料攪拌車的實際情況，做好維護和修理。在日常維護方面，混凝土自上料攪拌車除應按常規對汽車發動機、底盤等部位進行維護外，還須做好以下維護工作。
As a transport vehicle, the mixer must comply with the regulations in terms of maintenance and repair, and implement the maintenance system of "regular inspection, mandatory maintenance, and repair as appropriate". Under this premise, combined with the actual situation of the concrete self-feeding mixer truck, maintenance and repair shall be carried out. In terms of daily maintenance, the concrete self-feeding mixer should not only maintain the engine, chassis and other parts of the vehicle as per the routine, but also do the following maintenance work.
合理確定保護周期。汽車保護周期是指汽車保護的距離里程或工夫。車主在實踐運用進程中，應參照汽車制造廠引薦的保護周期，聯系汽車本身的技能情況和運用前提，對保護周期進行恰當?shù)恼{(diào)整。
Determine the protection period reasonably. Vehicle protection cycle refers to the distance or time of vehicle protection. In the process of practical application, the owner should refer to the protection cycle recommended by the automobile manufacturer, and make appropriate adjustments to the protection cycle in connection with the skill situation and application premise of the vehicle itself.
普通來說，新車在良好的路況前提下運用，無須過于頻繁地保護，以廠家規則的保護周期作為上限便可；而汽車技能情況較差，或運用前提惡劣，則應恰當縮短保護周期。更多相關內容就來我們網站http://pheenet.cn進行咨詢了解吧！
Generally speaking, new cars can be used under good road conditions without too frequent protection, and the protection period regulated by the manufacturer can be used as the upper limit; If the car skills are poor or the application premise is bad, the protection period should be appropriately shortened. Come to our website for more relevant content http://pheenet.cn Consult and understand!
