計算全自動攪拌車自由度要注意什么情況？
說到全自動攪拌車的自由度，應該是不少的用戶都非常的感興趣的，其實全自動攪拌車的自由度可以通過公式計算得出結果，當然要注意一些情況，下面來講講。
When it comes to the degree of freedom of automatic mixer, many users should be very interested in it. In fact, the degree of freedom of automatic mixer can be calculated by the formula. Of course, we should pay attention to some situations.
所謂全自動攪拌車局部自由度，是指機構中某些構件所具有的不影響其他構件運動的自由度。須有兩個原動件，機構才能有確定的運動。但是當凸輪作為原動件轉動時，從動件有確定的運動，這意味著有機構的自由度為1。
The so-called partial degree of freedom of automatic agitator refers to the degree of freedom that some members of the mechanism have which does not affect the movement of other members. There must be two primary members for the mechanism to have definite motion. But when the CAM rotates as the original, the follower has a definite motion, which means that the mechanism has a degree of freedom of 1.
公式計算結果所多余的自由度，是只滾子相對于從動作自由轉動的自由度。由于滾子的這種自由轉動不影響凸輪機構其它構件的運動，因此稱為局部自由度。局部自由度多見于變滑動摩擦圍觀東摩擦時添加滾子，軸承中的滾珠等，在計算自由度時，應把它們除去不計。
The extra degree of freedom calculated by the formula is the degree of freedom of the roller with respect to free rotation from the action. Because this kind of free rotation of roller does not affect the motion of other members of CAM mechanism, it is called local degree of freedom. Local degrees of freedom are more common in variable sliding friction and east friction when adding rollers, bearings in the ball, etc., in the calculation of degrees of freedom, they should be excluded.
全自動攪拌車廠家提醒大家，實際上計算過程其實挺復雜的，要認真仔細，哪怕是一個很小的細節(jié)都會導致結果出現(xiàn)錯誤，所以有很多注意事項，另外此公式也可以機構的自由度，那么在按照全自動攪拌車自由度公式計算機構自由度時要注意以上特殊情況。
Automatic mixing car manufacturer to remind everybody, in fact, calculation process is complicated, be careful, even if it is a very small details will result in errors as a result, so there are a lot of attention, and this formula can also be degrees of freedom, then in accordance with automatic mixers freedom formula institutions should pay attention to the above special cases when the degree of freedom.
按照上面的文章內(nèi)容大家應該就可以將全自動攪拌車的自由度計算出來了，之后如果還有疑問的話可以從中找出具體的答案，也可以來網(wǎng)站pheenet.cn向我們咨詢！
According to the content of the above article, you should be able to calculate the degree of freedom of the automatic mixer. After that, if you have any questions, you can find out the specific answer, and you can also come to the website pheenet.cn to consult us!
