攪拌車干燥罐使用多久該更換？
攪拌車上的零部件有很多，比如干燥器，很多人對干燥器這個部件了解不多，干燥罐如果出問題了就會失去吸收空氣中水分的作用，還有可能會進入到攪拌車的氣路系統，帶來更大的和財產損失。在選購干燥罐的時候，盡量挑選出氣孔細而多、結構較強的干燥罐，要知道干燥器使用時間長了也是需要更換的，那么什么時候更換是個關鍵問題。下面我們就來了解下：
There are many parts on the Zhongke Jufeng mixer, such as the dryer. Many people don't know much about the dryer. If there is something wrong with the drying tank, it will lose the function of absorbing moisture in the air, and it may enter the air system of the mixer, which will bring greater safety and property losses. When choosing the dryer, try to choose the dryer with more air holes and stronger structure. You should know that the dryer needs to be replaced after a long time of use, so when to replace it is a key problem. Now let's understand:
不同的車輛工況是不同的，而且不同廠家的干燥罐使用壽命也是不同的，在更換周期上沒有統一的標準，不過大家可以使用一些簡單的方來判斷干燥罐是否該更換。，我們可以從氣罐下手，利用氣罐底部的放氣閥門，來查看氣罐底部是否潮濕，或者有水。因為閥門正好位于氣罐底部。同時水的比重較大，如果干燥器失效，氣路中的濕氣因為重力自然會攢到氣罐底部，也就是閥門上方。
Different vehicle working conditions are different, and the service life of drying tanks of different manufacturers is also different. There is no unified standard on the replacement cycle, but you can use some simple methods to judge whether the drying tank should be replaced. First of all, we can start from the air tank and use the vent valve at the bottom of the air tank to check whether the bottom of the air tank is wet or there is water. Because the valve is right at the bottom of the tank. At the same time, the proportion of water is large. If the dryer fails, the moisture in the gas path will naturally accumulate to the bottom of the gas tank, that is, above the valve, because of gravity.
還有一種方法就是，通過釋放各個制動分泵的卸壓閥來檢查車輛氣路中是否含水。尤其是在冬天，氣溫低，一定要注意檢查管路中是否有水，防止制動失效，干燥罐滲漏，劣質的干燥罐是比較容易滲漏的，而且如果是在氣候潮濕的南方，干燥罐的使用壽命也會縮短。相反北方由于氣候比較干燥，北方的攪拌車的干燥罐使用壽命就比較長。
Another method is to check whether there is water in the air path of the vehicle by releasing the pressure relief valve of each brake cylinder. Especially in winter, the temperature is low, we must pay attention to check whether there is water in the pipeline, to prevent brake failure, drying tank leakage, poor quality drying tank is relatively easy to leak, and if it is in the humid South, the service life of drying tank will be shortened. On the contrary, due to the relatively dry climate in the north, the service life of the drying tank of the mixer truck in the north is relatively long.
攪拌車干燥罐更換方法：將攪拌車氣罐底部堆積的油漬或水漬放干凈后，換上新的干燥罐即可，在日常使用中，要養成經常查看氣罐放氣閥的良好習慣，還可以安裝一個拉環，那么不僅方便日常檢查，而且也可以時不時的轉動兩下，讓氣閥密封更加均勻，達到避免漏氣的效果。
Replacement method of mixer drying tank: put the oil or water stains accumulated at the bottom of the mixer air tank clean, and then replace it with a new drying tank. In daily use, we should form a good habit of checking the vent valve of the air tank frequently, and also install a pull ring, which is not only convenient for daily inspection, but also can rotate twice from time to time to make the air valve seal more evenly and avoid leakage The effect of air leakage.
小編提醒大家：干燥罐雖小，但是其作用卻不小，大家在平時保養車輛的時候，不僅要做好大件的保養，一些零碎的小部件也要做好保養，這樣才能保證車輛的使用壽命。
Xiao Bian reminds you: Although the dryer is small, its function is not small. When you maintain the vehicle at ordinary times, you should not only do a good job in the maintenance of large parts, but also do a good job in the maintenance of some small parts, so as to ensure the service life of the vehicle.
