自動攪拌車輪邊減速器的工作原理!
攪拌車在車輪邊上有個減速器,是傳動系中后一級減速增扭裝置,下面我們說說這個減速器的工作原理。
There is a reducer on the side of the wheel of Zhongke mixer, which is the second stage deceleration and torque increasing device in the transmission system. Let's talk about the working principle of this reducer.
輪邊減速器采用輪邊減速器可滿足在總傳動比相同的條件下,使變速器、傳動軸、主減速器、差速器、半軸等部件的載荷減少,尺寸變小以及使驅動橋獲得較大的離地間隙等優點,它被廣泛應用于載重貨車、大型攪拌車、越野汽車及其他一些大型工礦用車。因此對輪邊減速器的研究,具有很重要的實際意義和企業實用性。
With the same total transmission ratio, the wheel reducer can reduce the load of transmission, transmission shaft, main reducer, differential, half shaft and other parts, reduce the size, and make the drive axle get larger ground clearance. It is widely used in trucks, large mixer, off-road vehicles and other large industrial and mining vehicles. Therefore, the research of wheel reducer has very important practical significance and enterprise practicability.
目前采用的輪邊減速器,就是為滿足整個傳動系統匹配的需要,而增加的一套降速增扭的齒輪傳動裝置。安裝在攪拌車動力輸出終端,減輕變速箱負載。采用輪邊減速器是為了提高攪拌車的驅動力,以滿足或修正整個傳動系統驅動力的匹配。
At present, the wheel reducer is a set of gear transmission device which can reduce the speed and increase the torque to meet the matching needs of the whole transmission system. It is installed at the power output terminal of mixer to reduce the load of gearbox. The purpose of using wheel reducer is to improve the driving force of Zhongke mixer truck, so as to meet or modify the matching of driving force of the whole transmission system.
發動機點火經離合器、變速器和分動器把動力傳遞到前、后橋的主減速器,再從主減速器的輸出端傳遞到輪邊減速器及車輪,以驅動混凝土攪拌車行駛。在這一過程中,輪邊減速器的工作原理就是把主減速器傳遞的轉速和扭矩經過其降速增扭后,再傳遞到車輪,以便使車輪在地面附著力的反作用下,產生較大驅動力。
The engine ignition transmits the power to the main reducers of the front and rear axles through the clutch, transmission and transfer gears, and then from the output end of the main reducer to the wheel reducers and wheels to drive the concrete mixer. In this process, the working principle of the wheel side reducer is to transfer the speed and torque transmitted by the main reducer to the wheel after its speed reduction and torque increase, so as to make the wheel produce greater driving force under the reaction of the ground adhesion.
以上就是攪拌車輪邊減速器的工作原理,相信大家已經有所了解。如果您想要了解更多資訊,歡迎致電咨詢網站http://pheenet.cn。
The above is the working principle of Zhongke mixing wheel reducer, I believe you have some understanding. If you want to know more, please call our website http://pheenet.cn .
下一篇:攪拌車離合器磨損快的方案!上一篇:混凝土攪拌車無法啟動診斷要領!